WAGO-Industrial-Switches
852-1813 Lean-Managed-Switch
10.2
Im Command Line Interface (CLI) konfigurieren
Um den Switch über CLI zu konfigurieren wird eine Telnet- oder SSH-Verbindung
zum Switch benötigt.
Dieses Kapitel listet eine Auswahl der verfügbaren Befehle der
Befehlszeilenschnittstellen auf.
10.2.1
System Status
10.2.1.1
System Information
Tabelle 68: CLI "System Information" Configuration
Node
enable
configure
eth0
interface
acl
vlan
enable
enable
enable
enable
enable
Command
show hostname
reboot
ip address A.B.C.D/M
show
show
show
show interface eth0
show model
show running-config
show system-info
show uptime
Description
This command displays the system's network name.
This command reboots the system.
This command configures the static IP and subnet
mask for the system.
This command displays the current port
configuration.
This command displays the current access control
list.
This command displays the current VLAN
configuration.
This command displays the current Eth0
configurations.
This command displays the system information.
This command displays the current operating
configurations.
This command displays the system's CPU utilization
and memory information.
This command displays the system uptime.
Anhang 175
Handbuch
Version 1.0.0