Maintenance; System Log; Tabelle 87: Cli "Maintenance" Configuration; Tabelle 88: Cli "System Log" Configuration - WAGO 852-1813 Handbuch

192 Anhang
10.2.6.2

Maintenance

Tabelle 87: CLI "Maintenance" Configuration

Node
configure
configure
configure
configure
configure
configure
10.2.6.3

System Log

Tabelle 88: CLI "System Log" Configuration

Node
enable
enable
enable
configure
configure
Example
L2SWITCH#configure terminal
L2SWITCH(config)#syslog-server ip 192.168.200.106
L2SWITCH(config)#syslog-server enable
Handbuch
Version 1.0.0
Command
reboot
reload default-config
write memory
archive download-config
<URL PATH>
archive upload-config
<URL PATH>
archive download-fw
<URL PATH>
Command
show syslog
show syslog level <1-6>
show syslog server
syslog (disable | enable)
clear syslog
WAGO-Industrial-Switches
852-1813 Lean-Managed-Switch
Description
This command reboots the system.
This command resets the system configuration to the
default settings.
Note: The system automatically reboots to apply the
configurations.
This command writes the current operating
configurations to the configuration file.
This command downloads an updated configuration
file from the TFTP server, where <URL PATH> can
be:
ftp://user:pass@192.168.1.1/file
http://192.168.1.1/file
tftp://192.168.1.1/file
This command uploads the current configurations file
to the TFTP server.
This command downloads an updated firmware file
from the TFTP server, where <URL PATH> can be:
ftp://user:pass@192.168.1.1/file
http://192.168.1.1/file
tftp://192.168.1.1/file
Description
The command displays all log messages recorded in
the switch.
This command displays the log messages with the
"LEVEL" recorded in the switch.
The command displays the syslog server
configurations.
The command disables/enables the syslog function.
The command clears the syslog message.