Jumbo Frame; Tabelle 70: Cli "Jumbo Frame" Configuration - WAGO 852-1813 Handbuch

WAGO-Industrial-Switches
852-1813 Lean-Managed-Switch
10.2.2.2

Jumbo Frame

Tabelle 70: CLI "Jumbo Frame" Configuration

Node
enable
configure
configure
interface
configure
if-range
Command
show jumboframe
jumboframe
(10240|1522|1536|1552|92
16)
interface IFNAME
jumboframe(10240|1522|1
536|1552|9010|9216)
interface range
gigabitethernet1/0/PORTLI
STS
jumboframe(10240|1522|1
536|1552|9010|9216)
Description
This command displays the current jumbo frame
settings.
This command configures the maximum number of
bytes for frame sizes.
This command starts configuration mode.
This command configures the maximum number of
bytes per frame.
This command starts configuration mode.
This command configures the maximum number of
bytes per frame.
Anhang 177
Handbuch
Version 1.0.0