Sntp; Tabelle 71: Cli "Sntp" Configuration - WAGO 852-1813 Handbuch

178 Anhang
10.2.2.3

SNTP

Tabelle 71: CLI "SNTP" Configuration

Node
enable
configure
configure
configure
configure
configure
configure
configure
configure
configure
configure
Handbuch
Version 1.0.0
Command
show time
time
HOUR:MINUTE:SECOND
time date
YEAR/MONTH/DAY
time daylight-saving-time
no time
daylight-saving-time
time daylight-saving-time
start-date (first | second |
third | fourth | last)
(Sunday | Monday |
Tuesday | Wednesday |
Thursday | Friday |
Saturday) MONTH HOUR
time daylight-saving-time
end-date (first | second |
third | fourth | last)
(Sunday | Monday |
Tuesday | Wednesday |
Thursday | Friday |
Saturday) MONTH HOUR
time ntp-server
(disable|enable)
time ntp-server
IP_ADDRESS
time ntp-server
domain-name STRING
time timezone STRING
WAGO-Industrial-Switches
852-1813 Lean-Managed-Switch
Description
This command displays the current time and date
configuration.
This command sets the current time of the switch.
hour: 0 ... 23
min: 0 ... 59
sec: 0 ... 59
Note: If you do not configure daylight saving time until
after the date and time, the switch uses daylight
saving time.
This command sets the current date of the switch.
year: 1970–
month: 1 ... 12
day: 1 ... 31
This command enables daylight saving time.
This command disables daylight saving time on the
switch.
This command sets the start date of daylight saving
time.
This command sets the end date of daylight saving
time.
This command disables/enables the NTP server
settings.
This command sets the IP address of the time server.
This command sets the domain names of the time
server.
This command sets the time difference between UTC
(formerly GMT) and the time zone.
Valid range: −1200 ... +1200