172 Anhang
10.2.2.2
Jumbo Frame
Tabelle 70: CLI "Jumbo Frame" Configuration
Node
enable
configure
configure
interface
configure
if-range
Handbuch
Version 1.0.0
Command
show jumboframe
jumboframe
(10240|1522|1536|1552|92
16)
interface IFNAME
jumboframe(10240|1522|1
536|1552|9010|9216)
interface range
gigabitethernet1/0/PORTLI
STS
jumboframe(10240|1522|1
536|1552|9010|9216)
Industrial-Managed-Switches
852-1816 Lean-Managed.Switch
Description
This command displays the current jumbo frame
settings.
This command configures the maximum number of
bytes for frame sizes.
This command starts configuration mode.
This command configures the maximum number of
bytes per frame.
This command starts configuration mode.
This command configures the maximum number of
bytes per frame.