Im Command Line Interface (Cli) Konfigurieren; System Status; System Information; Tabelle 68: Cli "System Information" Configuration - WAGO 852-1816 Handbuch

170 Anhang
10.2

Im Command Line Interface (CLI) konfigurieren

Um den Switch über CLI zu konfigurieren wird eine Telnet- oder SSH-Verbindung
zum Switch benötigt.
Dieses Kapitel listet eine Auswahl der verfügbaren Befehle der
Befehlszeilenschnittstellen auf.
10.2.1

System Status

10.2.1.1

System Information

Tabelle 68: CLI "System Information" Configuration

Node
enable
configure
eth0
interface
acl
vlan
enable
enable
enable
enable
enable
Handbuch
Version 1.0.0
Command
show hostname
reboot
ip address A.B.C.D/M
show
show
show
show interface eth0
show model
show running-config
show system-info
show uptime
Industrial-Managed-Switches
852-1816 Lean-Managed.Switch
Description
This command displays the system's network name.
This command reboots the system.
This command configures the static IP and subnet
mask for the system.
This command displays the current port
configuration.
This command displays the current access control
list.
This command displays the current VLAN
configuration.
This command displays the current Eth0
configurations.
This command displays the system information.
This command displays the current operating
configurations.
This command displays the system's CPU utilization
and memory information.
This command displays the system uptime.