Olimpia splendid PELER 4D Handbuch Für Installation, Gebrauch Und Wartung Seite 49

possible water leakage could damage furniture or the floor.
• Do not place the appliance directly on carpets, towels, blankets or
other absorbent surfaces.
• Insert the plug in the power socket; the appliance beeps and the
display shows room temperature in °C and the "B1" symbol.
Before electrically connecting the appliance, make sure the plate data
correspond to those of the electricity distribution network.
3.3.b - Filling
It is necessary to add water in the tank (7) before the cooling/humidifier
function is activated.
Water can be added from the upper part of the appliance or by opening the
water reservoir (7):
Make sure that the cap (fig. A - pos.3) is positioned correctly.
- To add water from the upper part, open the lid (1) (fig. G), slowly pour
water in the compartment (7), then close the lid (1) again.
- To open the water reservoir (7) (fig. H):
• rotate the hook (6) by 90° (fig.H);
• slide the reservoir out (7);
• Pour water into the compartment (7);
• replace the reservoir (7) into the appliance and rotate the hook (6)
downwards (fig.H).
• Check the water level in the tank (7) through the water
level gauge (12) (fig.L).
• Do not fill the tank (7) beyond the maximum indicated level.
• Always use clean water.
• The appliance could produce a slight smell or the water in the tank (7)
could be slightly coloured during first use; this events are normal and
absolutely harmless for the user's health.
EN - 16
PELER 4D