Cleaning And Maintenance - EUROM Vento 3D Bedienungsanleitung

Timer
Mode
Speed
OSC (left and right)
OSC (up and down)

Cleaning and maintenance

Switch off the fan and remove the plug from the wall socket when you want to
clean it or carry out maintenance.
The fan only requires some general, external maintenance. Dust it regularly with a
soft cloth or feather duster or vacuum it clean with a soft vacuum cleaner brush.
Make sure that no water ends up on parts other than grate and trays! Never rinse
or spray the fan!
Press this button to set the number of hours that the fan
should operate; it can be set 1-7 hours. Pressing 1x=1
hour, pressing 2x=2 hours etc.
In the Standard mode the fan speed can be set (Low,
Medium, High, Turbo).
In the Natural (NAT) mode the fan speed can is
automatically alternated to imitate a natural wind. With the
SPEED button you can choose Natural wind-Low, Natural
wind-Medium, Natural wind-High, Natural wind-Turbo.
In the Nicht (SLE) mode the fan speed is automatically
alternated to imitate a Sleep wind. With the Speed button
this mode can be chosen for Sleep wind-Low, Sleep wind-
Medium, Sleep wind-High of Sleep wind-Turbo. The
average fan speed depends on the choise Low, Medium,
High, Turbo. The average fan speed in the Sleep wind
mode is lower than in the Natural wind mode because of
the noise level.
Setting fan speed
1=Low
2=Medium
3=High
4=Turbo
Automatic oscillation: swiveling counter-clockwise and
clockwise
Automatic oscillation: swiveling up and down
The fan can swivel simultaneously up and down and
counter-clockwise and clockwise
21