Troubleshooting Table - hanseatic HWC86GCBA Gebrauchsanleitung

Page EN-22

Troubleshooting table

Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. You can put
your own and future users' lives in danger. Only authorised specialists are allowed to
carry out this repair work.
Problem Possible cause
Compressor OFF,
No electricity to socket.
control element
Mains plug is loose.
OFF.
Compressor OFF,
Desired temperature has
control element
been reached.
ON.
Appliance cools Temperature has been set
too quickly. too low.
Temperature has been set
too high.
Door not tightly closed or
door seal is not completely
tight.
The appliance is near a
heat source or sunlight.
Minimum distances not
The appliance
maintained (too short).
does not cool
sufficiently.
Too many bottles of wine
stored.
Ambient temperature too
low or too high.
Compressor seems
defective.
Solutions, tips, explanations
Check the socket with another appliance.
Check the tightness of the mains plug.
Further cooling not required. When the
inside temperature rises, the compressor
automatically switches on.
Select a higher setting (see "Setting the
temperature" on page EN-12).
Select a lower setting (see "Setting the
temperature" on page EN-12).
See "Checking and cleaning the door
seals" on page EN-16.
Place insulation plate between the
appliances or change location.
Adhere to the minimum wall distances
(see "Choosing a suitable location" on
page EN-18).
Do not exceed the max. bottle number
(see "Intended use" on page EN-4).
Adjust the ambient temperature to the
climate category (see "Intended use" on
page EN-4).
Set the temperature to 5 °C (41 °F).
If the compressor does not switch on
within an hour, please contact our service
department (see page EN-24).