Troubleshooting Table - hanseatic SC-70W Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. You can put
your own and future users' lives in danger. Only authorised specialists are allowed to
carry out this repair work.
Problem Possible cause
Compressor OFF, No electricity to socket. Check the socket with another appliance.
control element
Mains plug is loose.
OFF.
Compressor OFF, Desired temperature
control element has been reached.
ON.
Appliance cools Temperature has been
too quickly. set too low.
T h e a p p l i a n c e Temperature has been
doesn't cool suffi- set too high.
ciently.
Door not tightly closed
or door seal is not com-
pletely tight.
The appliance is near a
heat source or sunlight.
Minimum distances not
maintained (too short).
Too many bottles of wine
stored.
Ambient temperature
too low or too high.
Compressor seems de-
fective.
Appliance is mak- Operating noises are
ing a noise. functional and are not a
sign of malfunction.
Disturbing noises.
Troubleshooting table
Solutions, tips, explanations
Check the tightness of the mains plug.
Further cooling not required. When the inside
temperature rises, the compressor automatically
switches on.
Select a higher setting (see „Setting the temper-
ature" on page GB-11).
Select a lower setting (see „Setting the tempera-
ture" on page GB-11).
See "Checking and cleaning the door seals" on
page GB-15.
Place insulation plate between the appliances or
change location.
Adhere to the minimum wall distances (see
„Choosing a suitable location" on page GB-17).
Do not exceed the maximum nominal capacity
(see corresponding product data sheet at the end
of this user manual).
Adjust the ambient temperature to the climate
category (see corresponding product data sheet
at the end of this user manual).
Set the temperature to '4'. If the compressor does
not switch on within an hour, please contact our
service centre (see page GB-24).
Humming: Refrigeration unit is running.
Flowing noise: Refrigerant is flowing through the
pipes.
Clicking: Compressor is switching on or off.
Check that it is stable.
Remove any objects from the appliance.
Remove any foreign matter from the back of the
appliance.
Page GB-23