Maintainance & Care; Care Instructions; Safety Instructions For Carbon Components - Coboc TEN Merano Bedienungsanleitung

Turn off your Coboc bike ("Bike off", possibly turn off the lights,
too). Always make sure, that your Coboc bike is turned off before
performing any maintenance or repair work. The motor could
start abruptly, if repairs are done on a turned on Coboc bike or contacts at
the motor plug could be under power. Both could lead to serious injury.
Do not remove the bottom bracket! The bottom bracket on your Coboc
bike is equipped with a sensor that is internally wired with the drive sys-
tem. Improper disassembly can cause damage to cables or sensor.

Care instructions

Regularly clean your Coboc bike from dirt. Not only does it preserve good
looks but also can it help keep functions alive. Never use hard water jets
like high-pressure cleaners or garden hose to clean your bike. Only wash it
by hands and never put it upside down. Electronics and ball bearings are
sealed tightly, which allows for regular operation even on rainy days. How-
ever, high-pressure cleaning might cause fluids or dirt to enter through the
seals and could damage bearings or electronics.
Always keep your chain greased. This allows for a low-noise operation and
minimizes wear. Make sure to use appropriate chain oil.
Maintainance & Care

Safety instructions for carbon components

We added a high-quality and very light carbon fork to reduce weight and
to refine looks of your TEN Merano.
Components made out of composite material might be damaged at
places not visible at first sight. Damaged parts may lead to
immediate failure and cause falls. Therefore, having the according
parts checked for functionality or non-apparent damage by the manufacturer
is mandatory after crashes or hard falls. Replacing and destroying the
damaged parts is also an option.
Furthermore, carbon parts need regular visual inspections. Check if single
layers like paint, finish or fiber are detaching. Look for changes on the surface
of the according parts, like chipping, holes or deep scratches. Make sure to
check if the components are getting softer or less stiff and solid. If this is the
case with one or more components, they should be replaced immediately.
55