Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.2.7 Using the VOLTAGE Function
Do not use on a circuit whose voltage either L-L or L-N exceeds 500V AC
Measuring the Voltage and Frequency
1. Connect the test lead input terminal
2. Turn the rotary switch to the V position
Do not attempt to measure when the input voltage is above 500V AC.
Value at the top right hand corner represents the Voltage, and the value below the frequency .
The display will appear without the TEST button operated.
WARNING!
Standby screen for the Voltage and Frequency
Screen while measuring Voltage and Frequency
-81-
Werbung
Inhaltsverzeichnis
