Before Use - EUROM FLOW-PRO 550CW Bedienungsanleitung

Corrosive, lightly flammable or explosive liquids (such as petrol, diesel, paraffin,
thinners etc.), seawater, fats, oil, salty or contaminated water from toilets etc.
cannot be pumped!
The temperature of the pumped liquids must not exceed 40°C.
Always prevent the pump from running if no water is being moved.
Note: these pumps may not be used in a swimming pool!
This pump is not suitable for continuous use, such as the continual circulation of
water. This type of use will substantially shorten the pump's life expectancy.
Description

Before use

When preparing the device for use, take the
plug out of the electrical socket!
Hose connection
Connect the hose connector to the fitting.
The hose connector goes from 25 to 32 mm (or
1" to 1½"). If you are exclusively using a more
wide hose, you can remove the remaining piece
of the fitting with a sharp knife or saw. Attach
the hose to the appropriate part of the
connector with a hose clamp (or turn it on it).
16