Technical Specifications - EUROM FLOW-PRO 550CW Bedienungsanleitung

Thank you
Thank you very much for choosing for a Eurom device. You have made a good
choice! We hope you will be satisfied about its functioning. To get maximum profit
from your panel, it is important to read this manual attentive and totally before
use, and to understand what is written. Read especially the safety instructions:
they are there to protect you and your environment. Keep the manual in a safe
place for future reference. Store also the package: that is the best protection for
your heater in times of no-use. And if you at any time pass the appliance on, pass
on the manual and package too.
We wish you a lot of fun with the Flow submersible pump!
Eurom
Kokosstraat 20
8281 JC Genemuiden (NL)
info@eurom.nl /
This manual has been complied with the utmost care. Nevertheless, we reserve the
right to optimize this manual at any time and to adjust it technically. The images
used may differ.

Technical specifications

Type
Connection voltage
Power consumption
Cap. max.
Class of insulation
Max. supply depth
Max. submersion
depth
Max. water temp.
Hose connection
Max. size of
contamination
Residual water
(Manual)
Start level (auto-
setting)
Stop level (auto-
setting)
Noise level Lpa
www.eurom.nl
FLOW-PRO 550CW
230V – 50Hz
550W
11.000 l/h
IP68
9m
5m
40°C
25mm – 1" – 32mm -
1½"
3mm
5mm
140mm
30mm
≤70dB(A)
FLOW-PRO 550DW
230V – 50Hz
11.000 l/h
25mm – 1" – 32mm -
≤70dB(A)
13
550W
IP68
7m
5m
40°C
1½"
16mm
16mm
140mm
30mm