EUROM FLOW-PRO 550CW Bedienungsanleitung Seite 20

Pump does not
start and stop in
AUTO setting
If these tips do not provide a solution, contact your supplier or service point.
Guarantee
The submersible pump you have purchased comes with the usual guarantee which
applies to production and material defects.
The following damage and defects are not covered by the guarantee:
 Wear and tear and defects in relation to mechanical seals caused by drying out
or the presence of specific substances and/or objects in the water.
 Blockage of the blade by foreign objects
 Transport damage
 Damage caused by unreasonable use
 Defects that unauthorised persons have attempted to resolve or which have
been caused by improper repairs
 Damage due to overheating
The guarantee and liability of the supplier, importer and manufacturer will be
nullified if the pump is opened by unauthorised persons or modifications or
additions are made to the pump.
Removal
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should be
made suitable for reuse in order to prevent any adverse effects to
health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled
CE-declaration
See page 71.
Dirt or stones in the
-
water supply
Blade is stuck
-
Problem with the motor
-
Pump is not vertical
-
The float is stuck
-
Remove dirt and stones
-
Remove blockage if possible
-
or consult service point
Consult service point
-
Make sure the pump is
-
standing up straight
Clean the float
-
20