Before Use - EUROM FLOW-PRO 550DW Gebrauchsanweisung

This pump is not suitable for continuous use, such as the continual circulation of
water. This type of use will substantially shorten the pump's life expectancy.
DESCRIPTION

BEFORE USE

When preparing the device for use, take the plug out of the electrical socket!
Hose connection
Connect the hose connector to the fitting.
The hose connector goes from 25 to 32 mm
(or 1" to 1½"). If you are exclusively using a
more wide hose, you can remove the
remaining piece of the fitting with a sharp
knife or saw. Attach the hose to the
appropriate part of the connector with a hose
clamp (or turn it on it). The best results of
pumping efficiency are achieved with a 32
mm hose.
Locating and moving
- Make sure the pump is positioned at a stable location, particularly if you want it to
work automatically.
12