EUROM FLOW-PRO 550CW Bedienungsanleitung Seite 15

 Allowing the pump to run dry will increase wear and tear and cause
overheating. Always prevent the pump from running if no water is
being moved and switch it off immediately if this is the case.
 Before you carry out checking or cleaning tasks on the pump you
must switch it off by removing the plug from the socket.
 In order to prevent injury, never put your fingers into the suction
opening on the pump when the device is plugged in!
 Close supervision is necessary when the product is used near
children, incapacitated persons or pets. The device is not suitable for
use by persons (including children) with a physical, sensual or
mental limitation or a lack of experience and knowledge, irrespective
of whether they are being supervised or have been issued with
instructions in relation to the use of the device by a person who is
responsible for their safety.
 Keep out of reach of children and never leave them unsupervised
with the appliance. Consequently, when selecting the location for
your machine, do so in such way that children do not have access to
the appliance. Always ensure that children cannot play with the
device.
 Never repair the pump, cable and/or plug yourself; always have this
maintenance carried out by an authorised expert. The importer and
manufacturer accept no liability for repairs and/or modifications to
the pump if they have been carried out by someone who is not
qualified to do so. Such interventions also nullify the guarantee.
Where can the pump be used?
This submersible pump has been designed for private usage in or around the home
and garden.
Submersible pumps are primarily used for draining water, moving liquids and
emptying water reservoirs, cellars, boats etc., and also for temporary circulation of
water.
The pumps are completely watertight and can be submerged in liquid with a
maximum depth of 5 metres.
These pumps are not suitable for table fountains or aquariums. If the pump is used
in a pond containing fish, you must take measures to prevent the fish being sucked
into the pump.
This pump can be used to pump clean and lightly polluted, non-aggressive liquids.
The liquid may contain particles of max. 3mm (Flow-Pro 550CW) or max. 16mm
(Flow-Pro 550DW) diameter.
Sand (and similar materials) in the liquid that is to be pumped will have a corrosive
effect and will lead to increased wear and tear.
15