Heating Of The Sauna - Sawotec MN-23NB Bedienungsanleitung

HEATINg of THE SAuNA

CAuTIoN!
Smoke and odor formation when heating up for the first time. Work materials from the manufacturing
process will be present on the new heating elements. These evaporate when the sauna heater is
heated up for the first time. This produces smoke and an unpleasant odor. Breathing in the fumes
or smoke can be harmful to your health.
Perform the following steps when operating the sauna heater for the first time and if the heating
elements for the sauna heater have been changed. In this way you will prevent damage to health
due to the fumes and smoke produced when heating up for the first time.
1. Select the highest possible temperature in the sauna control.
2. Heat up the sauna heater for half an hour. Do NOT stay in the sauna
3. Allow the sauna cabin to ventilate thoroughly after heating up for the first time.
4. If no smoke or odor is produced the next time the sauna heater is heated up, you can start to
use the sauna. If smoke or odor is produced again, leave the sauna cabin immediately and repeat
the initial heating up process followed by ventilation.
Always check the sauna room before switching sauna heater on (to be sure that there is no
combustible things within the safety distances of the heater or on the heater). Make sure that
sauna room has been efficiently ventilated. If the output of the heater is proper it will take about
he temperature in sauna room should
an hour to reach suitable temperature (See page 11).
be between +60 - +90 °C. Temperature is individual in every sauna room depending on
e.g. heater model, size of heater room, air ventilation and bathers preference.
Too powerful
heater will heat sauna room too quickly and the stones won't have enough time to warm. The water
poured on the stones will not evaporate, but flow into the stone holder. An underpowered heater,
on the other hand, would lead to an undesirably long heating period.
19
ENGLISH