Herunterladen Inhalt Inhalt Diese Seite drucken

Optional Accessories; Protecting The Environment - DeWalt D23700 Originalanweisungen

Kreissäge
Vorschau ausblenden Andere Handbücher für D23700:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
EN GLI SH
WARNING: Do not switch the tool on
or off when the saw blade touches the
workpiece or other materials.
WARNING: Do not operate the spindle
lock while the tool is running.
Guiding the Tool (fi g. 1)
• For optimum results, clamp the workpiece
bottom up.
• Follow the line drawn on the workpiece using
the mark (m)
• In case of a bevel angle of 45° follow the line
drawn on the workpiece using the mark (l).
• Lead the cord away in line with the rear of the
tool.
Dust Extraction (fi g. 1)
Your tool is fitted with a dust extraction outlet (e).
• Whenever possible, connect a dust extraction
device designed in accordance with the
relevant regulations regarding dust emission.
• Always use a vacuum extractor designed
in compliance with the applicable Directives
regarding dust emission when sawing wood.
Vacuum hoses of most common vacuum
cleaners will fit directly into the dust extraction
outlet.
WARNING: Do not use a vacuum
extractor without proper spark
protection when sawing metal.
MAINTENANCE
Your D
WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of
injury, turn unit off and disconnect
machine from power source before
installing and removing accessories,
before adjusting or changing
set-ups or when making repairs.
Be sure the trigger switch is in the OFF
position. An accidental start-up can
cause injury.
34
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.

Optional Accessories

WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D
WALT, recommended
E
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.

Protecting the Environment

Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and
packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
WALT, have
E
WALT product
E

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis