Operation; Before Startup; Dry Vacuum Cleaning - Kärcher MV 3 Handbuch

Note: Due to removing the handle, ac-
cessories can be directly attached to
the suction hose.
Recommendation: In order to vacu-
um the floor, attach the handle to the
suction hose.
See position 13.
Suction tubes 2 x 0.5 m
Illustration
Put both suction pipes together and

connect them with the handle.
Crevice nozzle
For edges, joints, heaters and hard

to reach locations.
Floor nozzle
(with inserts)
Illustration
For appliances with only one insert:
Note: For vacuuming dry dirt or wa-

ter off the floor - always work with
the insert (brush strip and rubber
lip) in the floor nozzle.
For appliances with two inserts:
When vacuuming dry dirt off the

floor, clip an insert with two brush
strips into the floor nozzle.
When vacuuming water off the

floor, clip an insert with two rubber
lips into the floor nozzle.
Adapter
Illustration
To connect the suction hose with an

electric tool
Adapt the adapter to the connection

diameter of the electric tool using a
knife if necessary.
16
Caution
Always work with an inserted
cartridge filter during wet as well
as dry vacuum cleaning!

Before Startup

Illustration
Mount loose parts delivered with

appliance prior to start-up.
Illustration
Connect accessories.

Illustration
Plug in the main plug.

Illustration
Turn on the machine.


Dry vacuum cleaning

Caution
Check the filter for damage prior
to installation and replace as
necessary.
Work with a dry cartridge filter
only!
Illustration
Recommendation: To vacuum fine

dust, use the filter bag.
Information filter bag
The filling level of the filter bag de-
–
pends on the dirt that is sucked in.
The filter bag needs to be replaced
–
more frequently while sucking in
fine dust, sand, etc.
Clogged filter bags can burst -
–
therefore make sure to replace the
filter bag in a timely manner!
Caution
Vacuum cold ashes only when
using a pre-filter.
Order no. basic design: 2.863-139.0,
premium design: 2.863-161.0.
– 9
EN

Operation

Start up