Maintenance; Cleaning Of The Appliance And Accessories; Removing Coffee Deposits From Glass Jug And Filter; Removing Coffee Deposits From Thermos Jug - Animo M-LINE M200 Betriebsanleitung

M-LINE

6. MAINTENANCE

WARNING
• The appliance must not be submerged or sprayed.
Never clean the hot plates (if present) with an
•
abrasive or sharp object. This way scratches on
the teflon surface will be prevented.
6.1

Cleaning of the appliance and accessories

- Clean the outside of the appliance with a clean, damp cloth, if necessary using a
mild (non-abrasive) cleaning agent.
- Do not use an abrasive, as this will leave scratches and dull patches.
- The glass jugs and the basket filter can be washed normally and rinsed clean.
Please note, however, that it is inadvisable to clean the basket filter in an industrial
dish washer as its lightness may cause it to float and sustain damage.
- The thermos jug, thermos jug with pump and the filter can be rinsed with hot water.
- The coffee deposit in the coffee jugs and the filter can be cleaned with Animo coffee
fur remover. The appliance is supplied with one sachet of coffee fur remover.
It is easy to use.

6.1.1 Removing coffee deposits from glass jug and filter

1. Fill a tray with approx. 5 litres of warm water and dissolve a sachet of coffee fur
remover in it.
2. Place the parts you want to clean in this solution and leave them to soak for 15 to 30
minutes.
3. Then rinse them several times with hot water, and repeat when necessary.
4. Sprinkle the powder on to heavily soiled parts and clean them with a wet brush.

6.1.2 Removing coffee deposits from thermos jug

1. Dissolve a quantity of coffee fur remover in warm water: use approx. 2 grams
per litre.
2. Fill the thermos jug with this solution.
3. Leave the solution to soak for 15 to 30 minutes, then pour it away.
4. Rinse the jug thoroughly with hot water and repeat this several times.
2015/02 Rev. 4.0
34
GB