Ir Remote Control; Cleaning And Maintenance - EuroLite LED IP PAD Bedienungsanleitung

Channel: Value:
000 – 004
005 – 125
6
126 – 255

IR REMOTE CONTROL

Button
Blackout LEDs off
SPR Internal programs; via „+/-„ the 3 internal programs can be chosen
FL Flash on or off; via „+/-„ the speed can be regulated
SP Speed; via „+/-„the color change and color fade speed can be regulated
D DMX mode
SA No function
SL Master/Slave mode
S Setting DMX address; via 1, 2, 3, 4, 5, 6, 7, 8, 9 the DMX addresses can be set
R (red)
G (green) Static colors; via „+/-„ the brightness can be regulated
B (blue)

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
Function:
On
Color change (7 colors)
(with increasing speed)
Color fade (7 colors)
(with increasing speed)
Parameter
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
38/40 00087754.DOC, Version 1.3