Operation; Eurolite Led Ip Pad Cob Rgb 25W, 51914155; Stand Alone-Mode - EuroLite LED IP PAD Bedienungsanleitung

OPERATION

After you connected the LED IP Pad to the mains, it starts running.
The LCD display lights up and you can choose the desired mode via the buttons MODE, ENTER, UP and
DOWN.
The device has two operating modes. It can be operated in Stand Alone via LCD display with operating
buttons or in DMX-controlled mode via lighting controller. Convenient controlling of the LED IP PAD COB
RGB 150W, 51914166 is also possible via the easy-to-use IR remote control.
The display shuts off after 30 seconds of inactivity. With the touch of a button it lights up again.
T
HE FUNCTIONS OF THE THREE

EUROLITE LED IP PAD COB RGB 25W, 51914155

- STAND ALONE-MODE

 Solid colors/Internal programs
 Master/Slave Mode
 RDM
 Dimmer curve
- DMX MODE
STAND ALONE-MODE
Solid colors / Internal programs
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With
the LED IP PAD COB RGB 25W, you can select up to 3 different chasers plus solid colors.
Selecting a chaser
Press the MODE button to select the internal program mode. Select the desired chaser (01 – 04) via the UP
or DOWN buttons (see following graphic).
Press the ENTER button to select brightness of the solid colors, speed and flash settings, respectively. As
soon as the digits blink, you can select the desired values via the UP or DOWN buttons.
Speed from 00 to 99, increasing.
Flash from 00 to 99, increasing.
Please press the ENTER button to confirm and to exit this mode.
01.STATIC
02.CHANGE-7
03.CHANGE-3
04.DREAM-7
Master/Slave Mode
Press the MODE button to select the SLAVE mode. The devices set in this manner can now be controlled by
the master unit.
Please press the ENTER button to confirm and to exit the SLAVE Mode.
RDM
With this function you can call up various submenus via RDM.
This device is RDM ready. RDM stands for "Remote Device Management" and makes remote control of
devices connected to the DMX-bus possible. ANSI E1.20-2006 by ESTA specifies the RDM standard as an
extension of the DMX512 protocol.
Manual settings like adjusting the DMX starting address are no longer needed. This is especially useful when
the device is installed in a remote area.
IP P
ADS ARE DESCRIBED INDIVIDUALLY IN THE FOLLOWING SECTIONS
R00 G00 B00 W00 F00
Seven color change
Three color change
Seven color fade
SP01-99 F00-99
SP01-99 F00-99
SP01-99 F00-99
28/40 00087754.DOC, Version 1.3
.