Product Description; Inserting Batteries; Taking A Measurement - Braun VitalScan BPW 4300 Gebrauchsanweisung

If in doubt, consult the technical service department or your
local representative.for model BPW4300
• The unit is intended to use in measuring blood pressure and
pulse rate for adult only, not recommended for neonatal baby.
• Do not use a cellular phone near the unit. It may result in
operational failure.
• Please avoid using in high radiant area in order to make your
measuring data correctly.
• Substitution of a cuff different from that supplied might result
in measurement error for more information regarding the
safety information and important precautions, contact your
local Service Center.

Product description

A Easy positioning system
B User button
C On/off button
D Memory/average
function button
E Battery compartment
F Time and date setting
button
G Adjust button
H Cuff
I Velcro strap
J User icon
K Systolic pressure

Inserting batteries

• Use alkaline batteries, 2 type LR 03 (AAA) (e.g. Energizer) as
supplied with this product.
• Warning: do not use rechargeable batteries.
• Remove the battery compartment cover and insert two
batteries with correct polarity (see symbol in the battery
compartment (E)).
• New batteries (Energizer) will provide approximately 300
measurements.
• Only discard empty batteries. They should not be
disposed of in the household waste, but at appropriate
collection sites or at your dealer.
6
L Diastolic pressure
M WHO/ESH indicator
N Pulse rate
O Heart rate indicator
P Low battery indicator
Q Irregular heartbeat
R Time
S Morning hypertension
T Month and day
U Mini-USB type B port
Key rules for accurate blood pressure
measurements
Correct handling is key for obtaining accurate measuring results!
• Always take readings at the same time of day, ideally in the
morning, under the same conditions.
• Do not measure within 30 minutes after smoking, coffee or tea
consumption.
• Take off wrist watch and jewelry before fitting the appliance on
the measuring arm.
• While taking a measurement, sit down, relax, keep still,
especially the hand and fingers of the measuring arm,
do not move or speak.
• Hold the appliance at heart level during the measurement.
• Wait approximately 3 minutes before repeating a
measurement.

Taking a measurement

For a reliable blood pressure measurement, please follow the
instructions below. Apply the cuff on your left wrist, when taking
a measurement. The device can also be used on your right wrist.
1. Place the monitor housing on the slim side of your bare
forearm with the monitor facing up. Keep the required
2 cm distance to your palm line.
2. Fasten the cuff on your wrist. Make sure that the cuff fits
2.0 cm
tightly.
3. Press the red on/off button (C).
7