Unold SLIM 18560 Bedienungsanleitung Seite 20

6. Switch on the kettle by pressing the ON/OFF switch downwards into the „I"-
position. The kettle cannot be switched on if it is not properly seated on the
base.
7. Whenever you take the kettle off the base, the appliance is automatically
switched off, even if the water is not yet boiling.
8. The kettle automatically stops heating at the latest when the water boils.
9. ATTENTION:
The automatic switch-off only works, if the lid is correctly closed.
10. Of course you may also push the switch into the „O"-position to interrupt heat-
ing.
11. CAUTION!
Ensure that the kettle is switched off before removing it from the base.
12. Please allow the product to cool down for a certain time before using the kettle
again to heat water.
13. The kettle is fitted with a dry-operation cutout that switches off the heating
elements when they become too hot, for instance when the kettle has boiled
dry. Allow the kettle to cool down. Then fill the kettle with cold water. This will
reset the cutout so that the kettle can be used again.
14. Always use fresh and cold water. Do not leave water in the kettle.
15. Switch off and unplug electrical appliances after use.
Boiling water can cause scalding. Therefore, please
handle the appliance with care when it contains hot
water.
The appliance becomes very hot during operation and
maintains the heat during some time after disconnection.
20
Copyright UNOLD AG | www.unold.de