SPL Phonitor One d Bedienungsanleitung Seite 7

When setting up the device, make sure that the mains socket outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power switch and
disconnect the power supply from the mains socket outlet. Even when the power switch is turned
off, electricity is still flowing to the product at a minimum rate. When you are not using the device
for a long time, make sure to unplug the power supply from the wall mains socket outlet.
Connections
Before connecting the device to other devices, power down all devices. Before power on or off
the devices, set all volume levels to minimum.
Only use appropriate cables to connect the device with other devices. Make sure that the cables
you use are intact and comply with the electrical specifications of the connection. Other connec-
tions can lead to health risks and damage the equipment.
Handling
Operate the controls and switches only as described in the manual. Incorrect adjustments outside
safe para meters can lead to damage. Never use excessive force on the switches or controls.
Do not insert your fingers or hands in any gaps or openings of the device.
Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or openings
of the device. If this happens, power down immediately and unplug the power supply from the
mains socket outlet. Then have the device inspected by a qualified professional.
Do not expose the device to excessive dust or vibrations or extreme cold or heat (such as direct
sunlight, near a heater or in a car during the day) to prevent the possibility of causing damage to
the housing, the internal components or unstable operation.
If the ambient temperature of the device suddenly changes, condensation can occur (if for exam-
ple the device is relocated or is affected by a heater or air conditioning).
Using the device while condensation is present may result in malfunction. Do not power on the
device for a few hours until the condensation is gone. Only then it is safe to power on.
Cleaning
Disconnect the power cord from the device before cleaning.
Do not use any solvents, as these can damage the chassis finish. Use a dry cloth, if necessary,
with an acid-free cleaning oil.
Phonitor One d
Disclaimer
Windows® is a registered trademark of Microsoft® Corporation in the United States and other
countries.
Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
The company names and product names in this manual are the trademarks or registered trade-
marks of their respective companies.
SPL and the SPL Logo are registered trademarks of SPL electronics GmbH.
SPL cannot be held responsible for damage caused by improper use or modification of the
device or data that is lost or destroyed.
Notes on Environmental Protection
At the end of its operating life, this product must not be disposed with regular
household waste but must be returned to a collection point for the recycling of
electrical and electronic equipment.
The wheelie bin symbol on the product, user manual and packaging indicates that.
For proper treatment, recovery and recycling of old products, please take them to applicable
collection points in accordance with your national legislation and the Directives 2012/19/EU.
The materials can be reused in accordance with their markings. Through reuse, recycling of raw
materials, or other forms of recycling of old products, you are making an important contribution
to the protection of our environment.
Your local administrative office can advise you of the responsible waste disposal point.
This directive only applies to countries inside the EU. If you wish to discard devices outside the
EU, please contact your local authorities or dealer and ask for the correct method of disposal.
WEEE-Reg-No.: 973 349 88
EN
DE
7