Specifications - SPL Phonitor One d Bedienungsanleitung

Analog inputs & outputs; 6.35 mm (1/4") TRS Jack (balanced), RCA
Input gain (max.)
Input impedance Line In 2 (balanced)
Common mode rejection
Input impedance Line In 1 (unbalanced)
Output gain (max.)
Output impedance Speaker Out (balanced)
Output impedance Line Out (unbalanced)
Frequency range (-3dB)
Noise (A-weighted, 0 dBu, 600 Ω load)
THD + N (0 dBu, 10 Hz – 22 kHz, 600 Ω)
THD + N (0 dBu, 10 Hz – 22 kHz, 32 Ω)
Crosstalk (1 kHz)
Dynamic range
4

Specifications

USB, 32-Bit AD/DA
+22.5 dBu
USB (B), PCM sample rates
20 kΩ
USB (B), DSD over PCM (DoP), sample
rates
< 60 dB
0 dBFS calibrated to
47 kΩ
Noise (A-weighted, 44.1/48 kHz
+22 dBu
sample rate)
150 Ω
THD + N (-1 dBFS, 10 Hz – 22 kHz)
75 Ω
Dynamic range (44,1/48 kHz sample
rate)
10 Hz - 200 kHz
- 99 dB
0.002 %
0.013 %
< 75 dB
121.5 dB
44.1/48/88.2/96/176.4/192/
352.8/384/705.6/768 kHz
2.8 (DSD64), 5.6 (DSD128), 11.2
(DSD256) MHz
15 dBu
-113 dBFS
0.0012 %
113 dBFS
Phonitor One d