Switching On The Sauna Light; Sauna Light During Operation; Sauna Light For Cleaning; Blower - Overrun Time - Infraworld Saunacontrol C Montage- Und Gebrauchsanweisungen

6.3.

Switching on the sauna light

6.3.1. Sauna light during operation

The sauna light is switched ON or OFF by pressing the

6.3.2. Sauna light for cleaning

Switch on with the -button (the start screen appears).
The light can now be switched ON or OFF with the
6.4. Blower - continued work
This display is only shown with active ventilator function = YES (see section 5.2).
Switch on with the
„blower" is shown. Use the
Each time the -button is pressed, the operating time increases by 15 minutes
(the Minus-button decreases the operating time by 15 minutes). A maximum of 60 minutes is possible.
The controls switch off automatically after the set time has expired.
By pressing the or
6.5.

Switching off

When the set time is complete, the control switches off automatically.
Press the -button to switch off during operation.
1 x -button... Return to start screen
2 x -button... Control is switched off (standby)
6.6.

Displaying operating statistics

Operating statistics are shown by holding down the
(when the sauna is off, standby).
oper. hrs.: 426:59
S 102:12 218:48
Heater Heating time
Exit by pressing the
-button (the start screen appears). Push the
-button to switch on the blower.
-button, the ventilator program is also terminated.
Total operating hours
(hrs., minutes)
Operating hours
-button
-button.
-button.
-button several times until
-button and by briefly pressing the
EN
-button
27