Selecting The Operating Mode - Infraworld Saunacontrol C Montage- Und Gebrauchsanweisungen

6.2. Select the operating mode:
Press the -button
Start sauna
(80 °C)
M = selection, light
Blower
( OFF )
-/M/+ = change
Prog. pre-select
( OFF )
-/M/+ = change
Max. oper. time
( 2:00:00 )
-/M/+ = change
EN
26
Operating mode "sauna"
5
Adjusted temperature 80 °C
If a button is not pressed for 5 seconds, it will start operating in the
selected operating mode (counter displayed on the right at the top).
Attention: It is not possible to change from one operating mode to
another during sauna operation! If this is desired, the cabin must be
switched off first and then restarted.
Operating mode "blower"
Display only shown with active blower function = YES
(see item 6.4)
Hold the MODE button down for 2 sec.
(while counter display greater than 0)
Max. operating time according to STANDARD EN60335-2


private operation 6 hours
commercial operation 12 hours