Operation; Switching On The Sauna; Starting The Sauna; Starting The Sauna With Activated Child Lock - Infraworld Saunacontrol C Montage- Und Gebrauchsanweisungen

Display in the operating mode
Operating mode:
Sauna
Sauna 1:25:32
Temp.:
6.1.

Switching on the sauna

6.1.1. Starting the sauna

After pressing the -button, the start screen appears on the display.

6.1.2. Starting the sauna with activated child lock

If the display shows „L O C K E D" when the sauna is switched on
The child lock function can be deactivated by holding down the Plus- and Minus-buttons and briefly pressing the
-button. The child lock is automatically enabled again when the sauna is switched off.

6.1.3. Possible operating modes

Select the operating mode by pressing the
- 1x for sauna
- 2x for blower [only active with blower function = YES] (see section 5.2)
After the countdown time has expired (counting down from 5 to 0 on the top right-hand side of the display), the
selected operating mode is enabled. The sauna starts with the last values set.
To access the programming mode, hold down the
(see section 8. Preselection).

6. OPERATION

Term
50 °C
(mode)
Current temperature
of cabin
-button several times:
, the child lock is active.
-button for 2 sec. (before the countdown time reaches 0)
EN
25