Type Plate; Energy Source; Standard Ambient Conditions For Operation - Sav 531.42 Betriebsanleitung

SAV 531.42 3 TECHNICAL SPECIFICATIONS
3.1

Type plate

A type plate with the following information is attached at the rear of the lifting magnet housing.
Type of the lifting magnet, year of manufacture, serial number, magnet weight
■
Lifting capacity table for the material as per S 235 JR (St 37) taking into account the shape and dimensions of
■
the loads.
Fig. 4: Type plate
3.2

Energy source

For correct functioning, the battery-powered lifting magnet requires sufficient power supply which is ensured by the
recommended fgFORTE Deep Cycle AGM 12 V DC battery:
The battery FG12-35D – 35 Ah is used for the type BM 1350.
■
The battery FG12-75D – 75 Ah is used for other battery-powered lifting magnet types.
■
The hand-held remote control is powered by a 9 V battery.
3.3

Standard ambient conditions for operation

The lifting magnets are designed for operation in outdoor and indoor environments, provided that the following
parameters are complied with: Max. humidity 80 %, air temperature between 0 and 50 °C.
DANGER!
For operation under deviating ambient conditions, custom versions of the lifting magnets can be offered by the
manufacturer on request.
Version 1.0
Hazard from wrong ambient conditions!
Operating the lifting magnet in the wrong ambient conditions can cause
fire, explosion or malfunction of the lifting magnet, in particular falling of the
magnet, and as a consequence severe injuries including death.
Do not operate the lifting magnet in the rain, in an area with a risk of fire
■
or explosion or in an area with vapours, smoke or dust with corrosive or
abrasive impact!
[
79
]
EN