SAV 531.42
3 TECHNICAL SPECIFICATIONS
3.
TECHNICAL SPECIFICATIONS
Model
Length
Width
Height
Inner height of the lifting
eye
Suspension height
Battery capacity
Input voltage
(50 – 60 Hz)
Power
Magnet weight
Operating period at
50 % utilisation
Flat materials
Lifting capacity (coeff.
2:1)*
Minimum thickness for the
maximum lifting capacity
Tested lifting capacity
Round materials
Lifting capacity
Diameter (d
– d
min.
Tested lifting capacity
* Flat materials used for testing the pull-off force – thickness 80 mm, Ra 1,6, S 235 JR (St 37).
SAV classification no.:
Max. load temperature:
Max. ambient temperature:
Special specifications for 531.99: Please note the Appendix (for special version)
Please note the current catalogue data sheets – printed or on the Internet (www.sav.de).
Other technical specifications for custom versions can be taken from the Appendix.
DANGER!
Version 1.0
BM 1350
[mm]
272/309
[mm]
242/262
[mm]
508
[mm]
90
[mm]
483
[Ah]
35
[V AC]
230
[W]
55
[kg]
60
[h]
8
[kg]
1350
[mm]
38
[kg]
2700
[kg]
–
)
[mm]
–
max.
[kg]
–
531.42
70 °C
50 °C
Risk of crushing!
The load can be released if the maximum lifting capacity is exceeded. There
is a risk of crushing.
Never lift any workpieces that exceed the values in the table (page 21).
■
The sheet thicknesses and wall thicknesses for tubes must not fall below
■
the stated minimum values.
BM 2500
BM 3600
BM 5000
402/437
1030/1050
1202/1200
242/262
242/262
242/300
512
512
90
90
487
487
75
75
230
230
72
103
72
180
8
8
2500
3600
50
25
5000
7200
–
–
–
–
–
–
[
]
75
BMP 1800
BMP 3600
470/475
760/764
238/242
253/263
527
659
90
90
502
634
75
75
230
230
144
130
203
167
8
8
5000
1800
50
50
10000
3600
–
1130
–
40-440
45-500
–
2260
EN
713
90
688
75
230
144
420
8
3600
70
6800
2260
4520