Benning CM 1-3 Bedienungsanleitung Seite 15

Digital current clamp multimeter for
- AC current measurements
- AC voltage measurements
- DC voltage measurements
- resistance measurements
- diode tests
- continuity tests
Table of contents
1. User instructions
2. Safety instructions
3. Scope of delivery
4. Device description
5. General information
6. Ambient conditions
7. Electrical specifications
8. Measuring with the BENNING CM 1-3
9. Maintenance
10. Technical data of measuring accessories
11. Environmental note
1. User instructions
This operating manual is intended for
- skilled electricians and
- electrotechnically trained personnel.
The BENNING CM 1-3 is intended for measurements under dry ambient condi-
tions. It must not be used in electrical circuits with a nominal voltage higher
then 1000 V DC and 750 V AC (see section 6 „Ambient conditions" for details).
The following symbols are used in this operating manual and on the
BENNING CM 1-3:
Application around and removal from HAZARDOUS LIVE conduc-
tors is permitted.
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to
persons.
Attention! Must comply with documentation!

This symbol indicates that the information provided in the operating
manual must be complied with in order to avoid risks.
This symbol on the BENNING CM 1-3 indicates that the
BENNING CM 1-3 is equipped with protective insulation (protec-
tion class II).
This symbol appears on the display to indicate a discharged
battery.
This symbol designates the „diode test" field.
This symbol designates the „continuity test" field.
The buzzer is intended for acoustic result output.
(DC) Direct voltage
(AC) Alternating voltage or current
Ground (voltage against ground)
09/ 2013
Operating Manual
BENNING CM 1-3
BENNING CM 1-3

9