M. J. MAILLIS GROUP SIAT S2-S A Bedienungsanleitung Und Ersatzteile Seite 86

12-OPERATION
Insert the adjustable support 2 into the guide and lock it with the knob 3.
Slide the printing head into the horizontal plate of the support. Make sure to
position correctly the plate 4.
Block with handle 5.
After checking that the voltage on the Kompatto nameplate matches
your local voltage, connect the power cord to the mains.
WARNING: the Kompatto can interfere with the machine upper assem-
bly. Before adjusting the machine for a new box format, always slide
the Kompatto unit fully outwards.
NB: for all instructions about set-up, operation, maintenance of the
Kompatto ink jet marker, please refer to the relevant manual.
86 January 2007
ENGLISH