M. J. MAILLIS GROUP SIAT S2-S A Bedienungsanleitung Und Ersatzteile Seite 81

11-SET-UP AND ADJUSTMENTS
Remove the bottom taping unit from its housing and put it on a working
bench.
Put a tape roll on the drum.
WARNING! Very sharp blade. It may cause serious injuries.
. Attach the tape leg to the threading tool (supplied with the tools kit).
Insert the plastic threading leader through the taping unit. Take care to
keep hands away from the tape cutting blades. (see section 3.11-g).
Follow the path through the unit as shown on Picture and make sure
that the adhesive side is placed on the correct side.
Pull and cut off the excess tape.
Put again the taping head into its seat..
January 2007 81
ENGLISH