General Safety Information - M. J. MAILLIS GROUP SIAT S2-S A Bedienungsanleitung Und Ersatzteile

3-SAFETY
3.1

GENERAL SAFETY INFORMATION

Read all the instructions carefully before starting the work with the machine; please pay particular attention to
sections marked by the symbol
The machine is provided with a LOCKABLE EMERGENCY STOP BUTTON placed
on the operator side of the machine; when this button is pressed, it stops the ma-
chine at any point in the working cycle.
Disconnect the machine from the mains before any maintenance operation.
Keep this manual in a handy place near the machine: its information will help you to maintain the machine in
good and safe working condition.
3.2 DEFINITION OF THE OPERATORS' QUALIFICATIONS
- Machine operator
- Maintenance technician
- Electrician
- Manufacturer's technician
Only persons who have the skills described in the following page should be allowed to work on the machine.
It is the responsibility of the user to appoint the operators having the appropriate skill level and the appropriate
training for each category of job.
SKILL 1
MACHINE OPERATOR
This operator is trained to use the machine with the machine controls, to feed cases into the machine, make
adjustments for different case sizes, to change the tape and to start, stop and restart production.
N.B.: the factory manager must ensure that the operator has been properly trained on all the machine functions
before starting work.
January 2007 57
ENGLISH