M. J. MAILLIS GROUP SIAT S2-S A Bedienungsanleitung Und Ersatzteile Seite 58

3-SAFETY
SKILL 2
MECHANICAL MAINTENANCE TECHNICIAN
This operator is trained to use the machine as the MACHINE OPERATOR and in addition is able to work with
the safety protection disconnected, to check and adjust mechanical parts, to carry out maintenance operations
and repair the machine.
He is not allowed to work on live electrical components.
SKILL 2a
ELECTRICAL MAINTENANCE TECHNICIAN
This operator is trained to use the machine as the MACHINE OPERATOR and in addition is able to work with
the safety protection disconnected, to make adjustments, to carry out maintenance operations and repair the
electrical components of the machine.
He is allowed to work on live electrical panels, connector blocks, control equipment etc.
SKILL 3
SPECIALIST FROM THE MANUFACTURER
Skilled operator sent by the manufacturer or its agent to perform complex repairs or modifications, when agreed
with the customer.
3.3 INSTRUCTIONS FOR A SAFE USE OF THE MACHINE
Only persons who have the skills described on the following paragraph 3.6 are allowed to work on the ma-
chine.
It is responsibility of the user to appoint the operators having the appropriate skill level and the appropriate
training for each category of job.
3.4 STATE OF THE MACHINE
List of the modes which are possible with this machine:
- automatic running;
- running with safety protections removed or disabled;
- stopped by using the main switch;
- stopped by using the lockable emergency stop button;
- electric power disconnected;
ENGLISH
58 January 2007