M. J. MAILLIS GROUP SIAT S2-S A Bedienungsanleitung Und Ersatzteile Seite 84

11-SET-UP AND ADJUSTMENTS
Turn the handle to raise the cover of some 430 mm over the column.
Screw the four spacers in the threaded holes and fasten them with an
8 mm wrench.
Insert in the four hexagonal spacer the column extension.
Turn the handle until the cover is down on the column.
Fasten with the screws removed befors.
Repeat the same operations on the column on the opposite side (wi-
thout handle).
Raise the head with the handle, remove the rigid supports, insert the
bottom taping head in its housing.
84 January 2007
ENGLISH