Purpose Of The Machine; Outer Columns In Low Position; Outer Column In High Position - M. J. MAILLIS GROUP SIAT S2-S A Bedienungsanleitung Und Ersatzteile

4-PRELIMINARY INFORMATION ON THE MACHINE
4.1 GENERAL DESCRIPTION OF THE MACHINE
Automatic case sealer with top and bottom drive belts and automatic adjustment to the box size to be sealed.
4.2 TECHNICAL SPECIFICATIONS
- Production = 650 boxes/hour (average)
- Standard power supply = 230/400 V 50Hz 3Ph
- N.2 motors (HP 0,18) KW 0,12
- Taping units K11, tape width 50 mm.
- Weight = 137,5 kg.
- Belts speed = 22 m per minute
- Compressed air = 6 Bar max.
4.3 TAPE DIMENSIONS
Suitable adhesive tapes:
PVC
OPP
ADHESIVE PAPER
4.4

PURPOSE OF THE MACHINE

The machine is designed to seal with adhesive tape cases having the dimensions (in millime-
ters) shown in section 4.5, by applying two tape stripes on their top and bottom flaps simul-
taneously.
4.5 BOX-SIZE RANGE
The case sealer S2-S is automatically adjustable to any box sizes included in the range
shown below (part 1).
To seal boxes higher than 750 mm, it is possible to modify the position of the outer columns
as shown in the drawing below (part 2).
NOTES
The box length (L) refers to the size in the seal direction.
The boxes should have a H/L ratio (HEIGHT/LENGTH) of 0,5 or higher.
Boxes with a lower ratio should be test run to ensure perfect performance, which depends upon various factors such as box weight
and rigidity.
Some special modifications are available from the manufacturer in order to seal box formats smaller or larger than the standard sizes
described herein. If interested, please contact your Siat Service Dealer
January 2007
1

OUTER COLUMNS IN LOW POSITION

BOX SIZE
2

OUTER COLUMN IN HIGH POSITION

BOZ SIZE
65
A
A = 410 mm max
B = 50 mm
C = 76 mm
h
w
MIN MAX
L 150
W 140 500
H 110 500
MIN MAX
L 150
W 140 500
H 115 700
C
B
l
ENGLISH