Theory Of Operation; Operating Modes; Emergency Stop - M. J. MAILLIS GROUP SIAT S2-S A Bedienungsanleitung Und Ersatzteile

8-THEORY OF OPERATION

8.1 DESCRIPTION OF THE WORKING CYCLE
After having closed manually the flaps of the case, the operator pushes it under the top infeed end in order to
avoid the opening of the top flaps.
Further pushing causes the top and bottom belts to drive the box through the taping units, which automatically
seal the top and bottom seams.
Afterwards the case is expelled on the exit conveyor.
8.2

OPERATING MODES

The case sealer Mod. S2-S has only one automatic working mode, with:
-The EMERGENCY STOP BUTTON unlocked
- The start button pushed ON
- Pneumatic circuit activated.
8.3 HOW TO STOP THE MACHINE
8.3.1 NORMAL STOP PROCEDURE
When the main switch is turned OFF, the machine stops immediately at any point of the working cycle.
The same thing happens in case of electric black-out or when the machine is disconnected from the mains.
Air pressure remains ON.

8.3.2 EMERGENCY STOP

The lockable button for emergency stop is located on the infeed side of the top head.
(This part is not produced by the machine manufacturer. For its technical specifications see section 15-ENCLO-
SURES).
ENGLISH
76 January 2007