Optional Accessories - M. J. MAILLIS GROUP SIAT S2-S A Bedienungsanleitung Und Ersatzteile

11-SET-UP AND ADJUSTMENTS

OPTIONAL ACCESSORIES

11.11 AS77 CASTERS (OPTIONAL)
(code nr. 7.8.04337.00B)
To make easier the machine displacement, it is possible to fit the op-
tional casters. Doing this, the conveyor bed height and the machine
overall dimensions change (see section 4.7).
Lift the machine as shown on Picture.
Remove the pad-feet, insert the casters fixing them with the two dowels and
set the desired conveyor bed height (refer to the graduated leg label).
(Caster height = 100 mm-4 inch).
11.12 AS80 LEGS (OPTIONAL)
(Kit code nr. 7.8.04413.00A)
To obtain a higher range of conveyor bed height as indicated at section
4.7, it is necessary to replace the inner legs with the longer AS80 legs.
Uplift the machine as shown on Picture.
Unlock the screws and take out the legs.Insert the new legs and block
them at the desired height.
11.13 ATTACHMENT FOR THE KOMPATTO INK-JET MARKER (OPTIO-
NAL)
(code nr. 7.8.04044)
Fix the guide 1 to the machine frame using the proper screws supplied
with the Kompatto unit.
January 2007 85
ENGLISH