M. J. MAILLIS GROUP SIAT S2-S A Bedienungsanleitung Und Ersatzteile Seite 82

11-SET-UP AND ADJUSTMENTS
11.3 TAPE DRUM ALIGNMENT
Check the centering of the tape on the rollers of the taping unit.
If needed, unlock bolt 1 and adjust screw 2.
11.4 TAPE DRUM FRICTION BRAKE ADJUSTMENT
Check the tape tension:
- with PVC tape the drum must be free
- with OPP tape the drum must be slightly frictioned
11.5 ADJUSTMENT OF TAPING UNITS ACCORDING TO THE TYPE OF
BOXES
Adjust the main spring:
- decrease the spring load for lightcardboard cases;
- increase the spring load for robustcardboard cases.
.
11.6 BOX WIDTH ADJUSTMENT
Center the box right in the middle of the conveyor bed. Approach and
fix the side guides using the proper knobs.
11.7 BOX HEIGHT ADJUSTMENT
Position the box on the exit side of the machine. Using the proper crank,
lower the top head until it slightly presses the box.
ENGLISH
82 January 2007