M. J. MAILLIS GROUP SIAT S2-S A Bedienungsanleitung Und Ersatzteile Seite 73

7-INSTALLATION
7.6 POSITIONING OF THE TOP UNIT TAPE HOLDER
Take away the screws that hold the core holder bracket to the ma-
chine. Position the bracket as shown on Picture and lock the screws
previously removed.
7.7 POSITIONING OF THE CRANK
Insert the handle in its housing.
Lock it with the screw.
7.8 POSITIONING OF THE COLUMNS
With the handle raise the upper head.
Insert enough rigid supports, 25 mm height, on the bottom briving
belts and always with the handle lean the upper head on the sup-
ports.
Remove the two screws A that fasten the column (with the handle)
to the bench of the machine.
January 2007 73
ENGLISH