Connect Wireless Speakers - Canton Smart Soundbar 9 Kurzanleitung

CONNECT WIRELESS SPEAKERS

The Soundbar 9 offers you the possibility to connect (pair) up to 3 additional
Canton Smart speakers wirelessly to an up to 5.1 home theater system.
Attention:
• Before pairing Smart speakers to the Smart Soundbar 9, please make sure
that the Smart speaker to be (newly) paired has been disconnected from
the power supply for at least 30 seconds.
Connect (pair) Smart speakers wirelessly:
Enter the main menu by pressing the „M" button. There, select the menu
1
item „Wireless Setup" [WIS] using the up or down arrow key „ / " and
confirm this with the „OK" button.
Confirm the (first) menu item „Wireless Pairing" [WSP] with the „OK" key.
2
Select the speaker to be paired using the up or down arrow key „ / " and
3
confirm your choice with the „OK" button.
Behind the selected speaker, the TV screen shows „Pairing" and [PIR] is
4
indicated in the display. Now, connect the power cord of the (new) spea-
ker to be connected into the power outlet and/or turn on the power
switch of this speaker (if present). After a successful pairing process, the
On-Screen Display shows „Connected" and the diplay of the Soundbar 9
as well as the display of the slave speaker indicates [CON].
Repeat the steps 3 and 4 until all speakers have been paired.
5
If the pairing process has failed, „Fail" appears on the TV behind the selec-
6
ted speaker and the display shows [FAI]. In this case, please repeat step 3
and 4 and make sure that the speaker to be paired has been disconnected
from the mains for at least 30 seconds before initiating the pairing process
by pressing the „OK" button.
English
3 4 3