Connection To Other Devices - Canton Smart Soundbar 9 Kurzanleitung

CONNECTION TO OTHER DEVICES

HDMI (recommended)
®
To connect other digital devices such as a satellite receiver, BluRay-player,
game console etc., it is recommended to connect these devices via one of
the 3 HDMI inputs of the Smart Soundbar 9.
®
Connect one of the 3 HDMI
1
Smart Soundbar 9 with the HDMI OUT output on your digital device with
a HDMI cable.
®
Now, select the used input [BDP] for HD1, [SAT] for HD2 or [PS] for HD3
2
with the up or down arrow key „ / " on the Smart-remote.
Note:
• Make sure that you do not connect the other playback devices to the TV,
but directly to the Soundbar 9. This is the only way to ensure that the
best possible multichannel audio format/audio signal is reproduced.
Optical digital input (alternative)
Connect the input OPTICAL on the Smart Soundbar 9 to the OPTICAL OUT
1
connector of your digital source with an optical cable (TOSLINK)
On the Smart-remote, use the up or down arrow key „ / " to select the
2
input [CD].
Notes:
• If the optical digital input is already in use, please use one of the other
unused inputs (COAXIAL and/or AUX).
• Make sure you have removed the protective caps from both ends of the
optical cable.
inputs (HD1/HD2/HD3) on the back of the
®
English
3 3 7