Herunterladen Inhalt Inhalt Diese Seite drucken

Ferm CDM1003 Gebrauchsanweisung Seite 5

Inhaltsverzeichnis

Werbung

GR
56
Do not dispose of in household
waste.
Important safety notes on charger and
batteryblok
If you come into contact with acid
from the battery block, rinse it off
with water immediately. If acid gets
into your eyes, rinse out your eyes at
once with water and contact a doctor
immediately!
1. Read and note the operating instructions
and safety notes for the charger and
battery block before use!
2. NB! Only use the charger and battery block
that were supplied by the manufacturer -
otherwise you will risk an accident.
3. Protect the charger, battery block and
power tool from moisture, e.g. rain or snow.
4. Always check that all cables are connected
correctly before using the charger.
5. If you discover that a cable is damaged,
you should not use the charger again.
Have the damaged cable replaced
immediately.
6. When the charger is not in use, the mains
plug should be removed from the power
socket. Do not pull out the plug by grasping
the cable.
7. If the charger has been dropped or has
otherwise been exposed to high
mechanical stresses, you should have it
checked for damage by an authorised
dealer before using it again. Damaged
parts should be repaired.
8. Exercise caution when handling the battery
block and do not drop it or expose it to
impacts.
9. Never attempt to repair the charger or
battery block yourself. Repairs must
always be carried out by an authorised
dealer - otherwise you risk an accident.
10. Before cleaning or servicing the charger or
battery block, always pull the plug from the
charger socket.
11. Never charge the battery block when the
ambient temperature is below 5 °C or
above 40°C.
Ferm
Ferm
12. The air vents in the charger must never be
blocked.
13. The battery block must not be short-
circuited.
A short-circuit will cause a high
current to flow. This may result in
overheating, the danger of fire or
explosion of the battery block. This
may damage the battery block or the
user may risk an accident.
Therefore:
• Do not connect any cables to the poles
of the battery block.
• Take care that there are no metal
objects (nails, paper clips, coins, etc.)
on the contact surface of the battery
block.
• Do not expose the battery block to
water or rain.
• Only use the battery block supplied in
combination with this cordless drill/
screwdriver so as to avoid faults and/or
risks to persons.
14. A damaged battery block or one that can
no longer be charged must be disposed of
as special waste. Do not discard it with
household waste.
15. Never throw the battery block onto a fire or
into water. This will risk explosion!
Electrical safety
When using electric machines always observe
the safety regulations applicable in your
country to reduce the risk of fire, electric shock
and personal injury. Read the following safety
instructions and also the enclosed safety
instructions.
Always check that the voltage on the
batterypack corresponds to the
voltage on the rating plate. Also
check that your mains voltage
corresponds to the input voltage of
the battery charger.
Class ll machine. Your machine is
double insulated; therefore no
earthwire is required.
GB
05

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Fdc-1200k

Inhaltsverzeichnis