Makita DUC122 Betriebsanleitung Seite 11

Symbols
The followings show the symbols which may be used for
the equipment. Be sure that you understand their mean-
ing before use.
• Read instruction manual.
• Wear safety glasses.
• Wear ear protection.
• Wear a helmet, goggles and ear
protection.
• Use appropriate protection for foot-
leg and hand-arm.
• This saw is to be used by properly
trained operators only.
• Do not expose to moisture.
• Maximum permissible cut length
• Direction of chain travel
• Only for EU countries
Ni-MH
Li-ion Due to the presence of hazardous
components
waste
equipment, accumulators and bat-
teries may have a negative impact
on the environment and human
health.
Do not dispose of electrical and
electronic appliances or batteries
with household waste!
In accordance with the European
Directive on waste electrical and
electronic equipment and on accu-
mulators and batteries and waste
accumulators and batteries, as well
as their adaptation to national law,
waste electrical equipment, batter-
ies and accumulators should be
stored separately and delivered to a
separate collection point for munici-
pal waste, operating in accordance
with the regulations on environmen-
tal protection.
This is indicated by the symbol of
the crossed-out wheeled bin placed
on the equipment.
• Guaranteed
according to EU Outdoor Noise
Directive.
in the equipment,
electrical and electronic
sound power level
• Sound power level according to
Australia NSW Noise Control Regu-
lation.
Intended use
The tool is intended for cutting branches / pruning trees.
It is also suitable for tree service.
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless Chain saw safety warnings
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw chain
is not contacting anything. A moment of inatten-
tion while operating chain saws may cause entan-
glement of your clothing or body with the saw chain.
2. Always hold the chain saw with your right hand
on the top handle and your left hand on the front
handle. Holding the chain saw with a reversed hand
configuration increases the risk of personal injury
and should never be done.
3. Hold the power tool by insulated gripping sur-
faces only, because the saw chain may contact
hidden wiring. Saw chains contacting a "live" wire
may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
4. Wear safety glasses and hearing protection. Fur-
ther protective equipment for head, hands, legs and
feet is recommended. Adequate protective clothing
will reduce personal injury by flying debris or acci-
dental contact with the saw chain.
5. Always keep proper footing.
6. When cutting a limb that is under tension be
alert for spring back. When the tension in the wood
fibres is released the spring loaded limb may strike
the operator and/or throw the chain saw out of con-
trol.
7. Use extreme caution when cutting brush and
saplings. The slender material may catch the saw
chain and be whipped toward you or pull you off bal-
ance.
8. Carry the chain saw by the front handle with the
chain saw switched off and away from your
body. When transporting or storing the chain
saw always fit the guide bar cover. Proper han-
dling of the chain saw will reduce the likelihood of
accidental contact with the moving saw chain.
9. Follow instructions for lubricating, chain ten-
sioning and changing accessories. Improperly
tensioned or lubricated chain may either break or
increase the chance for kickback.
10. Keep handles dry, clean, and free from oil and
grease. Greasy, oily handles are slippery causing
loss of control.
ENE090-1
GEA010-2
GEB119-2
11