Specifications - Makita DUC122 Betriebsanleitung

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Indicator lamps
5 Check button
6 Lock-off button
7 Switch trigger
8 Cutter
9 Guide bar
10 Arrow

SPECIFICATIONS

Standard guide bar
Standard saw chain
Sprocket
Overall length
Net weight
Chain speed per minute (min
Chain oil tank volume
Rated voltage
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge(s).
Applicable battery cartridge and charger
Battery cartridge
• Some of the battery cartridges and chargers listed above may not be available depending on your region of resi-
dence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
10
Explanation of general view
11 Spring
12 Sprocket
13 Hook
14 Hole
15 Sprocket cover
16 Knob
17 Oil tank cap
18 Oil inspection window
19 Oil tank opening
20 Tip guide
Model
Guide bar length
Cutting length
Type
Type
Pitch
Gauge
No. of drive links
Number of teeth
Pitch
*1
*2
–1
)
Charger
21 Lower guide
22 Scabbard (chain cover)
23 Push nut
24 Slotted bit screwdriver
25 Filter
26 Locking ring
27 Washer
28 Limit mark
29 Brush holder cap
30 Screwdriver
DUC122
Carving bar
6.35 mm (1/4")
1.3 mm (0.05")
6.35 mm (1/4")
422 mm
2.4 - 2.7 kg
5.0 m/s (300 m/min)
D.C. 18 V
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B /
BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE /
DC18SF / DC18SH
115 mm
11.5 cm
25 AP
42
9
1.7 kg
3
80 cm