Technical Specification - Elcometer 138 Bedienungsanleitung

4 TEST PROCEDURE US NAVY PPI
To calculate the conductivity, divide the reading displayed by one of the factors shown in the table below:
Surface Density of Salts Reading
2
mg/m
2
µg/cm

5 TECHNICAL SPECIFICATION

5.1 ELCOMETER 138 BRESLE SALT KITS
Kit Dimensions
Kit Weight
5.2 BRESLE PATCH
Patch Size
Test Area
Sample Volume
e 2
Based on an area of 12.5cm and a volume of 3ml.
www.elcometer.com
: 63101-000 (continued)
e
393 x 331 x 95mm (15.5 x 13 x 3.7")
1.4kg (3lb 1oz)
5cm x 5cm
2
12.5cm
3ml
Conductivity Value (µS/cm)
ISO Salt Mix
Divide by 1.2
Divide by 0.12
e
IMO PSPC equivalent NaCI
Divide by
1.1
Divide by
0.11
R
en-10