Proper Use; General Safety Information - Scheppach TIGER 2000S Original Bedienungsanleitung

The fixture for blades (fixture 60 / art. no. 89490708)
is only supplied with the following machines: art. no.
89490919, 89490924, 89490928, 89490942
The universal fixture (fixture 70 / art. no. 89490919) is
only supplied with the following machines: art. no.
89490916, 89490919,
89490930, 89490934, 89490942

5. Proper use

m The wet grinding machine is constructed ex-
clusively for use with the tool offered for grinding
steel (no carbide).
• The machine complies with the applicable EC ma-
chinery directive.
• The machine is designed for single-shift opera-
tion, duty cycle S1 100%.
• Observe all safety information and danger notices
on the machine.
• Ensure that all of the safety information and danger
notices on the machine are complete and in legible
condition.
• Only use the machine when in a technically faultless
condition, appropriately and in compliance with the
operating manual and with full knowledge of safety
and hazards! In particular, rectify malfunctions that
could impair safety immediately (or commission rec-
tification works accordingly)!
• The manufacturer's safety, operating and mainte-
nance specifications as well as the dimensions giv-
en in the technical data must be observed.
• Relevant accident prevention regulations and oth-
er generally recognized safety and technical rules
must also be observed.
• The machine may only be used, maintained or
repaired by trained persons who are familiar
with it and have been informed of the dangers.
Any liability of the manufacturer for damages resulting
from arbitrary changes to the machine is excluded.
• The machine is intended for use only with original ac-
cessories and original tools from the manufacturer.
• Any use beyond this is improper use. The manufac-
turer is not responsible for the resultant damages,
the user bears this risk alone.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.
22 | GB
89490924, 89490928,
www.scheppach.com

6. General safety information

General power tool safety warnings
m WARNING!
Read all safety warnings, instructions, illustra-
tions and specifications provided with this power
tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.